Location
Leipzig, Germany
Owner
Flughafen Leipzig-Halle GmbH
Completed on
2000
Scope of our work
conceptual design, construction design, site supervision
Architect
AP Brunnert, Stuttgart
This six-storey parking garage consists of five simple bridges each 65 m in length. The first bridge also has a cantilever of 22 m looking towards the existing Air Terminal. The structure is formed by two parts (side by side) of two independent steel-truss-girders, each with about 17 m height. They carry 6 decks of steel cross-girders with 16.5 m length acting as composite section with the concrete deck slab. The bridge supports are formed by concrete stair-cases of about 28 m height and two additional mid thirds per support axis. Two spiral structures with conical concrete shell roofs of 18 m diameter each (in the first and the fourth span) form the approach for vehicles. The chosen bridge-structure was necessary because of the existing road system in the airport area and a new railway-line (under construction) which crosses the parking building near the existing “Autobahn”, where the building ends.
Length: approx. 350 m
Spans: 5 × 62.70 m + cantilever lenght 22 m
Height: max. approx. 28 m – 6 storeys
Base area: 12,560 m²
Roof area: 14,300 m²
Gross Cubic capacity: 275.000 m³
Parking garage: 2,700 parking spaces
Length: approx. 350 m
Spans: 5 × 62.70 m + cantilever lenght 22 m
Height: max. approx. 28 m – 6 storeys
Base area: 12,560 m²
Roof area: 14,300 m²
Gross Cubic capacity: 275.000 m³
Parking garage: 2,700 parking spaces
Concrete: 20,000 m³
Steel: 7,500 t
Reinforcement steel: 3,500 t
Airport Leipzig/Halle, multi-storey parking garage
